Paramount Fitness KLD7001S User Manual

FLAME HEATER
PATIO HEATER INSTRUCTION MANUAL
Model no. KLD7001S, KLD7001SS
Item no. PH-F-121-BK MO, PH-F-121-SS MO
For customer service, parts
or warranty issues:
Call 1-800-561-5550
or e-mail customercare@jrhome.com
WARNING
HAZARDOUS FIRE OR EXPLOSION MAY RESULT IF
INSTRUCTIONS ARE IGNORED.
It is the consumer’s responsibility to see that the
patio heater is properly assembled, installed, and
taken care of. Failure to follow instructions in this
manual could result in bodily injury and/or
property damage.
PRECAUTIONS
vapours and liquids in the vicinity of this or any
other appliance.
•Any LP cylinder not connected for use shall not be
stored in the vicinity of this or any other appliance
FOR YOUR SAFETY IF YOU SMELL GAS:
1.T
3.Do not operate any electrical appliances
4.Ventilate the area.
5.Check for leaks as detailed in this manual.
6.If odour persists, contact your dealer or gas
supplier immediately.
!
!
FOR OUTDFOOR USE ONLY | USES PROPANE LPG ONLY
PLEASE READ INSTRUCTIONS CAREFULLY BEFORE ASSEMBLY
RETAIN THIS MANUAL FOR REFERENCE
Conforms to ANSI
STD Z83.26a-2008
Certified to CSA
STD 2.37a-2008
5000199

Paramount Fitness KLD7001S Specifications

General

Brand	Paramount Fitness
Model	KLD7001S
Category	Patio Heater
Language	English

Summary

Product Overview and Safety Warnings

General Safety Warnings

Highlights critical warnings about fire, explosion, and proper heater usage.

Precautionary Measures

Lists essential precautions for safe operation, including leak checks and handling LP cylinders.

Critical Safety Hazards

Carbon Monoxide Hazard

Details the severe risk of carbon monoxide poisoning in enclosed spaces.

Installation and Service Warnings

Warns about injury or damage from improper installation, adjustment, or maintenance.

Outdoor Use and Cylinder Requirements

Specifies outdoor use only and requirements for LPG cylinders.

Operational Safety Rules

Key Safety Precautions

Emphasizes outdoor use, avoiding combustible materials, and handling the heater safely.

Handling and Environment Safety

Covers precautions like avoiding rain, liquid splashes, and ensuring children's safety around the hot unit.

Appliance Location and Clearance

Outdoor Use and Ventilation Requirements

Mandates outdoor use, adequate ventilation, and proper clearance from combustibles.

Placement and Environmental Considerations

Guidelines on level ground, avoiding explosive atmospheres, and wind considerations.

Leak Testing and Installation Safety

Leak Testing Procedure

Step-by-step guide for checking gas connections for leaks using a soap solution.

Important Safety Rules for Installation

Essential safety guidelines for installation, including outdoor use and assembly completion.

Heater Assembly Preparation

Parts Check and Assembly Area

Instructs to verify all parts against the list and prepare a suitable assembly surface.

Step 1: Base Assembly

The first assembly step, focusing on the base structure and attaching wheels.

Heater Assembly - Steps 2 & 3

Step 2: Attaching Lower Legs

Instructions for attaching the lower legs to the heater base using screws.

Step 3: Installing Support Plates

Guide for fitting the middle plate and stability ring onto the assembled structure.

Heater Assembly - Steps 4 & 5

Step 4: Installing Burner and Gas Components

Instructions for installing the burner and related gas components within the heater assembly.

Step 5: Securing Main Structure

Steps for attaching the upper section and securing it with screws.

Heater Assembly - Steps 6 & 7

Step 6: Attaching Upper Legs

Details on connecting the upper leg sections to the main body of the heater.

Step 7: Mounting Reflector Plate

Instructions for mounting the reflector plate to the top of the heater assembly.

Heater Assembly - Steps 8 & 9

Step 8: Securing Top Plate

Guide for attaching the top plate of the heater using wing nuts.

Step 9: Installing Glass Tube

Instructions for carefully inserting the glass tube into the center of the heater.

Heater Assembly - Steps 10 & 11

Step 10: Attaching Protection Guards

Instructions for fitting the protection guards onto the heater's sides.

Step 11: Securing Side Panels

Guide for attaching side panels to the heater structure with screws.

Heater Assembly - Steps 12, 13 & 16

Step 12: Installing Final Side Panels

Instructions for installing the remaining side panels to enclose the heater.

Step 13 & 16: Connecting Gas System

Guide for connecting the gas regulator and hose assembly to the heater unit.

Heater Assembly - Step 14

Step 14: Attaching Front Panel

Final step to attach the front panel, completing the heater's external structure.

Operation and Lighting

Preparation for Operation

Steps before operating, including connecting the gas cylinder and testing hoses.

Lighting Instructions

Detailed procedure for safely lighting the heater's pilot and main burner.

Maintenance and Storage Procedures

Cleaning and Routine Maintenance

Guidelines for keeping the heater clean and performing routine checks for optimal performance.

Storage Between Uses

Instructions on how to properly store the heater between uses or during periods of inactivity.

Troubleshooting Guide

Pilot and Burner Issues

Solutions for common problems like the pilot not lighting or burner flame issues.

Flame, Smoke, and Buildup Issues

Addresses problems such as flames going off, black smoke, and carbon buildup.

Warranty and Registration

Product Warranty Coverage

Explains the product warranty coverage, limitations, and conditions that void the warranty.

Warranty Registration Process

Instructions on how to register the product to receive warranty service, including contact details.