To Next PageTo Next Page
Need help?Do you have a question about the Paramount Fitness MDX2 and is the answer not in the manual?
General| Brand | Paramount Fitness |
|---|---|
| Model | MDX2 |
| Category | Lighting Equipment |
| Language | English |
Read and follow these instructions. Give these instructions to the facility owner for future reference.
MDX2 and SDX must be installed in accordance with Paramount's written instruction manual and applicable codes.
Do not go near suction fittings or drains; hair or body may become trapped causing injury or drowning.
Suction systems must be installed properly to avoid severe injury or drowning.
Warning about vent tubes for entrapment avoidance and proper use during winterization/startup.
MDX2 is rated for a maximum of 90 GPM. System designers must ensure this limit is not exceeded.
Instructions for positioning the MDX2 sump and SDX drain, and anchoring the sump in concrete.
Selecting location and cutting holes for SDX drain in steel, plastic, or concrete walls.
Installing SDX bulkhead fittings with the UP arrow oriented correctly and securing them.
