Quirks
& bugs
20.
* Aer doing certain shi presses, the rate pots for the VCF
and LFO will sometimes become unresponsive and you will
have a very slow rate. is is a known bug, but easily xed by
simply pressing any button once to regain rate control.
* When pressing Button 3, the lter will temporarily open.
is is normal behaviour.
* When the noise is selected it demands alot of processing
power from the microcontroller so it’s best used without the
blend activated.
* Just note that the lter has a bit of stepping to it, especially
at the bottom of the range which gets pronounced with the
resonance turned up.
* e Sample & Hold is analog, so aer a while it will start
to dri alittle out of tune. It uses a capacitor to store the
VCO voltage, and unfortunately no capacitor is perfect and
will leak the charge eventually.
To Next Page
Loading...