Need help?Do you have a question about the Parasound HALO C-2 and is the answer not in the manual?
General| Total Harmonic Distortion (THD) | < 0.005% |
|---|---|
| Signal-to-Noise Ratio (SNR) | > 100 dB |
| Type | Preamplifier |
| Frequency Response | 10 Hz - 100 kHz |
| Input Impedance | 47k ohms |
| Digital Outputs | Coaxial, Optical |
| Surround Sound Formats | Dolby Digital |
Essential advice for positioning the C 2 for optimal use, reliability, and heat dissipation.
An overview of the C 2's rear panel connections, guiding initial setup.
Explains how to power the C 2 on/off, adjust volume, and select audio/video sources.
Describes methods for selecting different audio and video input sources for playback.
How to access and navigate through the C 2's various setup menus using the remote or PC.
Options for adjusting global audio settings like Dolby/DTS, Bass Limiter, Treble, Bass, LFE, and Reverb.
Configuration for speaker levels, distances, sizes, and autocalibration for optimal sound.
Associating program sources with specific input jacks and customizing titles.
Explanation of composite, S-Video, component video, and audio connection types.
Describes the signals available at the C 2's unbalanced and balanced analog outputs.
How to connect the C 2's video outputs to main and secondary displays.
Information on using the serial port for automation systems, programming, and software updates.
Steps to diagnose and resolve power-related issues with the C 2 unit.
Troubleshooting steps for when the C 2 powers on but produces no audio output.
Steps for preparing and shipping the unit for repair, including obtaining an RA number.
To Next Page
