To Next PageTo Next Page
Need help?Do you have a question about the Parasound HCA-1205A and is the answer not in the manual?
General| Channels | 5 |
|---|---|
| Signal-to-Noise Ratio | 110 dB |
| Weight | 35 lbs |
| Type | Power Amplifier |
| Power Output (4 Ohms) | 200W per channel |
| Total Harmonic Distortion (THD) | 0.03% |
| Frequency Response | 20 Hz - 20 kHz |
| Input Sensitivity | 1.2V for full output |
Covers safe operation, cleaning, ventilation, placement, and power source guidelines.
Warnings regarding water, overloading, internal voltage, and lightning surge protection.
Instructions for repairs, replacement parts, and handling unit damage.
Inspect unit for shipping damage and record serial/purchase dates.
Position away from heat, ensure shelf support, and use rack mounting hardware.
Maintain space and airflow to prevent overheating and thermal shutdown.
Disconnect AC cord before making connections and ensure no strain on wires.
Connect speaker wires using 5-way binding posts with spade lugs, banana plugs, or bare wire.
Match speaker wire markings to amplifier terminals for correct polarity.
Connect speakers with 4 Ω or 8 Ω impedance; avoid sustained operation below 2 Ω.
Connect directly to a wall outlet, avoid accessory outlets, use appropriate conditioners.
Manual and automatic turn-on methods using the power switch and trigger.
Explains AC Line, Standby/Normal, and Current Overload LEDs.
Details on cleaning, fuse replacement, and general upkeep.
Guidance for resolving issues and contacting service.
