To Next PageTo Next Page
Need help?Do you have a question about the Parat PARASYNC and is the answer not in the manual?
Charge and sync up to 20 Apple iPad Mini devices with two auxiliary USB ports for peripherals.
Identifies key components of the PARASYNC dock including power, USB ports, and air vents.
Use only approved PARASYNC cases to prevent damage to the dock or iPad Mini.
Ensure mounting surface supports 31 pounds per dock when loaded with 20 encased iPad Minis.
Insert and remove encased iPad Minis vertically as shown in the diagram.
Do not stack items on top of the PARASYNC dock to avoid damage or obstruction.
Follow the steps to open the PARASYNC case for device insertion.
Insert the flexible cover and iPad Mini, then install the case top securely.
Use a small flat blade screwdriver to release snaps and remove the iPad Mini from its case.
Configure iPad Mini settings in iTunes for optimal syncing with the PARASYNC dock.
Connect AC power, turn on the switch, and firmly insert turned-off iPad Minis into slots.
Connect to a computer via USB and use iTunes or Apple Configurator for syncing.
Disconnect from computer if connected, then switch the power to the "OFF" position.
Understand the LED status lights indicating charging, connection, and availability.
Ensure the mounting surface can safely support 31 pounds per mounted dock.
Drill four holes matching the dock's threaded inserts for secure mounting.
Remove mounting feet screws, insert #6-32 screws, and secure the dock to the surface.
General| Brand | Parat |
|---|---|
| Model | PARASYNC |
| Category | Docking Station |
| Language | English |
