Paratec GmbH
Next H / C
Issue II
04-2005
Owner‘s Manual
6
Closing the Reserve Container
Please follow the packing instructions of your reserve manufacturer‘s
manual to this stage. This picture shows you the packing tools, re-
commended by us. Being a experienced rigger, you should not need
more. Note the clamp (yellow circle), which keeps the 1st reserve
flap from folding back, so you have easy access to the reserve tray,
making it much easier to place the reserve riser and the free bag
into the reserve container.
The reserve risers are still being tied together which makes the pro
packing of the reserve (recommended) easier and will assure sym-
metry throughout the pack job.
Important: Please make sure to remove this tie after you
have put the reserve risers into the pack tray. To asure
that this is not being forgotten, use a long and bright co-
lour tape as seen in the picture.
To Next Page
Loading...