—12—
7>Default Color
6>Default Magnification
Enter the submenu Default Magnification with a short press of OK button.
Select “6.5x” or “13x” as default magnification and confirm your selection with a
short press of OK button.
5>Gyroscope
Enter the submenu Gyroscope with a short press of OK button. Select "Display"
or "Calibration" with a short press of +/- button. Select "On" or "Off" to turn on/off
the gyroscope after entering "Display". Turn on the gyroscope before you select
—13—
8>Brightness Of IR
Enter the submenu Brightness of IR with a short press of OK button. Select
“Off ” ,“1”, “2”, or “3” with a short press of +/- button. Confirm your selection with a
short press of OK button.
Please note this setting is for the default brightness of IR. Pressing IR button
under Black & White mode for instant setting of IR brightness.
Enter the submenu Default Color with a short press of OK button. Select “Color”
or “Black & White” mode with a short press of +/- button, then confirm your
selection with a short press of OK button.
—14—
—15—
3>PIP (Picture-in-Picture)
4>Reticle Adjustment
Enter the submenu PIP mode with a short press of OK button. Select “off, on,
shortcut key off or shortcut key on” with +/- button. Confirm your selection with a
short press of OK button.
Once the shortcut key of PIP is turned on, enter or exit PIP mode with a long
press of Menu button. (Laser function can not work in this situation)
Enter the submenu reticle adjustment with a short press of OK button. Select
options with a short press of OK button and adjust value with short press of +/- button.
To confirm your setting by enter “Save” with a short press of + button or cancel
with a short press of – button, then press OK button to confirm and exit.
“ ”
“ ”
Ballistic Data
Target Vely(fps)
Bullet Wt(gr)
Bullet BC
Altitude(ft)
Temperature(F)
Scope Ht(inch)
Zero Range(yds)
A
263
46
0.465
4350
50
276
42
2>Range Unit Selection
Enter the submenu range unit selection with a short press of OK button. Select
“Meter” or “ Yard” with a short press of +/- button. Confirm your selection with a
short press of OK button.
value of them. (support to save 5 groups of ballistic data in this devices. After
selecting A-E bullet data, adjust the values of Target Vely, Bullet weight, Bullet BC,
Altitude, Temperature, Scope Ht and Zero Range accordingly). To save and return to
the observation interface by a .long press of the menu button
"Calibration". Enter "Calibration" by a short press of OK button. Keep the
machine level and stand still for about 8 seconds to complete the calibration.
9>Brightness
Enter the submenu Brightness with a short press of OK button. Select “LEVEL 0”,
“LEVEL 1”, “LEVEL 2”, “LEVEL 3” or “LEVEL 4” , with a short press of
+/- button. Confirm your selection with a short press of OK button.
“LEVEL 5”,“LEVEL 6”
6.5x
A
X:0 Y:0
Style
Color Save
To Next Page
Loading...
