—2—
—3—
—1—
Operation manual
TA32 / 37 / 62 THERMAL IMAGING DEVICES
Usage and Precautions
◇
◇
TA Series products can be used on day time and at night. Please use 3.7V lithium
ion rechargeable battery.
User needs to remove the protection tape at battery, and charge battery until
full before first time use.
◇ Device maintenance or repairing work should be conducted by PARD official
authorized technicians, DO NOT open device case by any unrecognized technicians.
In case of failure, please contact your domestic Distributors at once for after sales
service. If any unauthorized mechanical work applied to the device will treat as
abandoning the warranty service.
◇ Do not have the device focus directly at high-intensity radiation sources such as
the sun, electric welding and strong laser. Detector will be damaged under direct
To users
Dear user
Thank you very much for choosing PARD infrared thermal imaging device.
Please read this manual carefully before your first use;
After you read, please keep this manual properly for easy reference in case of
problems during use afterwards.
Please read this user manual carefully and be sure to follow the procedures
elaborated in this manual to avoid components damage caused by improper
operation.
If this manual has any amendments due to any software version upgrade or any
other reasons, PARD will not provide separate notice to individual users, users are
recommended to visit PARD official website periodically for update information.
To Next Page
Need help?
General
