Note:
1
2
3
4
5
2.1 Unscrew the battery cap counterclockwise and
remove the battery.
2.2 Remove the insulating tape on the positive
(+) terminal of the battery.
2.3 Insert the battery, ensuring that the positive
(+) side goes in first and tighten the battery cap
clockwise.
2.4 Press and hold the power button for about 3
seconds to power the device. (The power light
illuminates and the PARD Logo will be displayed
on the screen, indicating the device is ready for
use.)
10
To Next Page
Loading...
