2
Important
• This manual applies to all LRF models of the TA Series
• Never remove the battery while the unit is switched on, even in sleep mode as this may
cause the device to fail to start up or function abnormally. You may need to reinstall the
software to correct this
o Ensure that the LED is NOT on before removing the battery
• Always remove the Battery from the device for charging and only use a quality charging
device and batteries
o These devices use 18650 FLAT TOP batteries (3.7v)
o Remove the battery when the device is not being used (Storage)
• DO NOT power the unit from an external USB Battery source
• Never point the device at strong sources of light, such as the sun, welding or a laser;
damaged caused by such will void the warranty
Videos
We have made a series of videos on setting up the PARD
All our videos are taken in New Zealand, they show the real-world results that can be achieved with
the PARD. Visit pard.co.nz and look for ‘How to videos’ under the Support Menu
Support
If you have any questions or issues with your device, please contact us via the pard.co.nz website
Some variations may exist due to variations in the firmware
This manual is for New Zealand Only.
If you are after after hours support, please txt or email us as we do have families – it maybe a simple
fix and we can reply quickly if available
Warranty
In New Zealand this device is warranted against defects in materials and workmanship for a period
of three years from the date of purchase
This applies to the original purchaser only
Do not attempt to disassemble the device by yourself. If there are any issues please contact us.
All damage caused by misuse or accidental damage, including use in abnormal working conditions,
damage caused by failure to follow the instructions or damage by batteries is not covered by the
warranty
To Next Page
Loading...
Need help?
General