Pard TA Series User Manual

4
Check if the aiming box (Thermal Scope) and the Laser itself (in the night vision scope) are pointing at
the same place.
If it is not then this is how you move the aiming box
1. Turn on LRF
2. Open Main Menu
3. LONG press of the + Button
4. Now you will see a X and Y
5. Use + and – with OK to move between them
6. It will just slowly move across with 1 press
7. Once happy – SHORT Press of the MENU button to save

Pard TA Series Specifications

General

Brand	Pard
Model	TA Series
Category	Measuring Instruments
Language	English