Paris Rhone PE-HE001 - User Manual

IMPORTANT SAFETY INSTRUCTIONS
BEFORE USING THIS APPLIANCE READ ALL INSTRUCTIONS AND CAUTIONARY MARKINGS
IN YOUR USER MANUAL AND ON THE APPLIANCE
INTENDED USE
· This heater is not intended for use in bathroom, laundry areas and similar moist indoor
locations. Never locate heater where it may fall into a bathtub or other water container.
· Use this heater only as described in this manual. Any other use not recommended by the
manufacturer may cause fire, electric shock, or injury to persons.
· The output of this heater may vary and its temperature may become intense enough to burn
exposed skin. Use of this heater is not recommended for persons with reduced sensitivity to
heat or an inability to react to avoid burns.
ELECTRICAL SAFETY
· Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or similar
coverings. Do not route cord under furniture or appliances. Arrange cord away from traffic
area and where it will not be tipped over.
· It is normal for the plug to feel warm to the touch; however, a loose fit between the AC outlet
(receptacle) and plug may cause overheating and distortion of the plug. Contact a qualified
electrician to replace loose or worn outlet.
· To disconnect the heater, first turn it off, then remove plug from outlet. Never pull by the cord.
· Always plug heaters directly into a wall outlet/receptacle. Never use with an extension cord or
reloadable power tap (outlet/power strip).
RELATED TO USE
· This heater is hot when in use. To avoid burns, do not let bare skin touch hot surface.
Keep combustible materials such as furniture, pillows, bedding, papers, clothes and curtains at
least 3 feet (0.9m) from the front of the heater.
· Extreme caution is necessary when this heater is used by or near children or invalids and
whenever the heater is left operating and unattended.
· Do not operate any heater with a damaged cord or plug or after the heater malfunctions, has
been dropped or damaged in any manner. Discard heater or return heater to authorized
service facility for examination, electrical or mechanical adjustment, or repair.
· Do not use the heater outdoors.
· To prevent a possible fire, do not block air intakes or exhausts in any manner.
· Do not use on soft surface, like a bed, where openings may become blocked.
· A heater has hot and arcing or sparking parts inside. Do not use it in the areas where gasoline,
paint, or flammable liquids are used or stored.
· Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may
cause an electric shock or fire, or damage the heater.
· Always unplug the heater when not in use.
· Never tamper with the heater or attempt to fix it. Any tampering with, or modification of this
product can result in serious injury, death, or fire, risk of electric shock. Do Not open. No user
serviceable parts inside.
· DO NOT remove product labels that contain warnings or safety instruction.
· Before cleaning, or storage, or when not in use, turn the heater off and unplug it.
Input
Rated Power
Remote Control Battery
Specifications
120V~ 60Hz
1500W (High)
900W (Low)
AAA 1.5V (not included)
PTC FAN HEATER
User Manual
PE-HE001
READ ALL INSTRUCTIONS BEFORE
USING THIS HEATER.
SAVE THESE INSTRUCTIONS
Air Outlet
Control Panel
Display
Base
Knowing Your Heater

Summary

Important Safety Instructions

Intended Use

Defines the specific applications and limitations of the heater for safe operation.

Electrical Safety

Covers safe handling of the power cord, plug, and outlets to prevent electrical hazards.

Related to Use

Provides crucial advice on operating the heater safely around people and combustible materials.

Using Your Heater

On;Off and Standby Mode

How to turn the heater on, off, and its standby operation features.

Mode Selection

Cycling through High, Low, and ECO modes for heating.

Temperature Adjustment

Adjusting the temperature and switching between Fahrenheit and Celsius.

Oscillation and Timer Functions

Controlling oscillation and setting the auto-off timer for the heater.

Other Heater Features

Memory Function

The heater remembers your last settings when turned on again.

Auto Shut-off Features

Automatic shut-off for 12-hour operation, tip-over, and overheat protection.

Overview

1. Function Description
2. Usage Features
3. Maintenance Features

This document describes the PARIS RHÔNE PTC Fan Heater, model PE-HE001, a portable electric heater designed for indoor use.

Function Description

The PTC Fan Heater is primarily designed to provide supplemental heating in indoor spaces. It utilizes a Positive Temperature Coefficient (PTC) heating element, which allows for efficient and safe heating. The fan distributes the generated heat into the room.

The heater offers multiple operating modes to suit different heating needs:

• High (HI) Mode: Provides maximum heating output.
• Low (LO) Mode: Offers a reduced heating output for milder warmth or energy saving.
• ECO Mode: In this intelligent mode, the heater automatically adjusts its working mode (High or Low) based on the ambient temperature to maintain an optimal comfort level while conserving energy.

The device also includes a temperature adjustment feature, allowing users to set a desired temperature range between 41°F and 95°F. Once the room temperature reaches the preset level, the heater will automatically stop working. It will resume operation if the temperature falls below the preset. The temperature display format can be switched between Fahrenheit and Celsius.

An oscillation function is integrated, enabling the heater to rotate and distribute warm air more evenly across a wider area in the room. This can be started or stopped as needed.

For convenience, the heater can be set with a timer for automatic shut-off, ranging from 0 to 12 hours. This feature is useful for setting the heater to turn off after a specific period, for example, when going to sleep.

Usage Features

The heater is designed for straightforward operation, accessible via a control panel on the unit and a remote control.

Power and Mode Control:

• On/Off/Standby: A dedicated button allows users to turn the heater on, put it into standby mode, or turn it off. The default settings upon power-on are 95°F and HI Level. After the heater is powered off, the internal fan continues to work for 15 seconds to cool down the unit, ensuring longevity and safety.
• Mode Selection: A "Mode" button allows cycling through High, Low, and ECO heating modes.
• ECO Mode Activation (Remote Control): The remote control includes a "Menu" button specifically for turning the ECO mode on or off.

Temperature Adjustment:

• +/- Buttons: These buttons are used to adjust the desired temperature. Holding both buttons simultaneously allows switching between Fahrenheit and Celsius display formats.

Oscillation Control:

• Oscillation Button: This button initiates or stops the oscillation function. Holding this button can also cancel the auto display off function, keeping the display continuously active.

Timer Functionality:

• Timer Button: This button is used to set the auto-off timer from 0 to 12 hours. Holding the timer button will turn off the timer function.

Safety Features: The heater incorporates several safety mechanisms to ensure safe operation:

• 12-hour Auto Off: The heater automatically shuts off after 12 continuous hours of operation, preventing prolonged unattended use.
• Tip-over Protection: If the heater is accidentally tipped over, it will automatically shut off to prevent fire hazards.
• Overheat Protection: The heater is equipped with a sensor that monitors the ambient temperature. If the temperature exceeds 122°F (50°C), the heater will automatically shut off to prevent overheating and potential damage or fire.
• Safe Placement: It is crucial to place the heater on a firm, level surface, free from obstructions, and at least 3 feet (0.9 meters) away from any walls or combustible materials.
• Cord Management: The power cord should not be run under carpeting, covered by rugs, or routed under furniture or appliances. It should be arranged away from traffic areas to prevent tripping.
• Direct Plugging: Heaters should always be plugged directly into a wall outlet/receptacle and never used with extension cords or reloadable power taps (outlet/power strips). A loose fit between the plug and outlet can cause overheating, so a qualified electrician should address loose outlets.
• No Outdoor Use: The heater is strictly for indoor use and should not be operated outdoors.
• Airflow Obstruction: To prevent fire, air intakes and exhausts must not be blocked. The heater should not be used on soft surfaces like beds where openings might become blocked.
• Flammable Materials: Do not use the heater in areas where gasoline, paint, or flammable liquids are stored or used, as it contains hot and arcing/sparking parts.
• Foreign Objects: Never insert or allow foreign objects into any ventilation or exhaust opening, as this can cause electric shock, fire, or damage.
• Unplug When Not in Use: Always unplug the heater when it is not in use.

Memory Function: The heater includes a memory function that remembers the last settings (mode, temperature, oscillation, timer) used. When the heater is turned on again, it will resume operation with these stored settings, enhancing user convenience.

Maintenance Features

Proper maintenance ensures the longevity and safe operation of the heater.

• Cleaning: Before cleaning, storing, or when not in use, always turn the heater off and unplug it from the power outlet. Specific cleaning instructions are not detailed in this excerpt but are generally found in the full user manual.
• No Tampering: Users are explicitly warned not to tamper with the heater or attempt to fix it. Any unauthorized modification can lead to serious injury, death, fire, or electric shock. The device contains no user-serviceable parts inside, and the casing should not be opened.
• Product Labels: Do not remove any product labels that contain warnings or safety instructions, as these are crucial for safe operation.
• Damaged Units: Do not operate any heater with a damaged cord or plug, or if the heater malfunctions, has been dropped, or damaged in any manner. A damaged heater should be discarded or returned to an authorized service facility for examination, electrical or mechanical adjustment, or repair.

Paris Rhone PE-HE001 Specifications

General

Heating Method	Ceramic
Heat Output	1500W
Power Source	Electric
Timer	Yes
Oscillation	Yes
Tip-Over Protection	Yes
Overheat Protection	Yes
Power	1500W
Voltage	120V
Frequency	60Hz
Thermostat	Adjustable