Parkeon Strada PAL - Prepare Transfer Cassette for Collection

Page 35/71
6.8 Preparing the transfer cassette
6.8.1 Preliminary operations
A. Make sure that the transfer cassette is empty.
6.8.2 Procedure
A. If the collection key (1) has been removed from the slide (3) of the transfer cassette, the operator must
place the key on the slide (4) before collecting (the key must remain on the cassette during the entire
collection).
B. Push the locking lever (2) and bring forward the transfer cassette slide (5) to close the cassette.
Preparing the transfer cassette (slide unlocked)
C. Push the "once" rearmament system (1) to arm the system.
D. Check that the light turns white (2).
E. Lock the rearmament system with a padlock (3) and / or sealing.
Cassette prepared with key and "once" system armed
The transfer cassette is ready to be used.