Why does my Parker Hiross HYPERCHILL PLUS ICEP040 Chiller compressor stop when the liquid line is frosted for a long time?
If the liquid line is frosted for extended periods, this can cause the compressor to stop.
General| Cooling Capacity | 40 kW |
|---|---|
| Refrigerant | R410A |
| Power Supply | 400V/3Ph/50Hz |
| Water Flow Rate | 6.9 m³/h |
| Max Working Pressure | 10 bar |
| Water Temperature Range | 5°C to 30°C |
Details on water circuit checks, connections, and filling procedures.
Instructions for electrical connections, safety checks, and supply requirements.
Step-by-step instructions for starting the chiller unit.
Procedure for safely shutting down the chiller unit.
Information on managing and interpreting unit alarms.
Accessing and reviewing the log of past alarms and warnings.
To Next Page