Need help?Do you have a question about the Parker Zander K-MT 1/D3 and is the answer not in the manual?
General| Model | K-MT 1/D3 |
|---|---|
| Category | Dryer |
| Voltage | 230 V |
| Frequency | 50 Hz |
| Weight | 25 kg |
| Capacity | 1000 l/min |
| Heating | No |
| Temperature Range | 5 - 50°C |
Contact information, standard equipment, and associated documents for the dryer.
Explains the manual's content, symbols, and target audience.
Crucial warnings regarding air ejection, pressure, electrical hazards, and drying agents.
Defines the dryer's purpose, prohibits improper uses, and covers disassembly.
Details dryer packaging and steps for addressing transport damage.
Introduces the process of moving and setting up the dryer.
Instructions for securing the dryer to the floor or wall.
Specifies conditions required for the dryer's installation location.
Details on moving the dryer from packaging to its installation site.
Requirements for the storage location and procedure for storing the dryer.
Diagram labeling components and explaining the dryer's operational principle.
Details the steps involved in dehumidifying air and regenerating the drying agent.
Lists optional features like dewpoint-sensing control and compressor synchronisation.
Owner's prerequisites and instructions for connecting the dryer to the air system.
Guidance on power connection and external signaling lines.
Prerequisites and verification steps before the first dryer start-up.
Overview of the ON/OFF switch, display panel, and LED indicators.
Step-by-step guide for starting the dryer.
Instructions on how to change between fixed and variable cycle modes.
Emphasizes regular checks, operating limits, and dewpoint readings.
Lists common error codes and their potential causes.
Procedures for immediate shutdown and safely depressurising the unit.
Procedures for restarting the dryer after a shutdown.
Maintenance warnings, recommendations, and a schedule of tasks.
Guide for using the dongle and performing daily checks.
Tasks for 12, 24, and 48-month intervals, including component replacements.
Detailed steps for replacing solenoid valves, drying agent, and perforated plates.
Lists component abbreviations and an overview of fault types.
Guides to identifying, causing, and remedying faults, including dewpoint-specific issues.
Dryer specifications, performance details, and replacement part information.
Control logic, flow diagrams, and dimensional drawings of the dryer.
To Next Page
