Parker DVU230 - Mechanical and Dismantling Instructions

DVU230
4
Warnings
Warnings
Mechanical and Dismantling Instructions
2.
1. Remove 4 screws at the Rear Cover (exploded view screws )
2. Remove 2 screws at Top Cover(exploded view screws )., Push the Top Cover toward the Rear
3.Remove 5 screws at the Inner Metal Plate and then open it. (exploded view screws , )
4.Remove two screws at side of panel. (exploded view screws )
5.Remove 4 screws at both sides of the loader and disconnect 4 wire connections.(exploded view screws )
6.Remove the power board, First remove the 4 screws (exploded view screws ) secondly remove the 5
screws.(exploded view screws , )
4
13
2
7
13
12
3
21
5
8