ADJUSTMENTS
Parker designed the Fly guitar to be easy to adjust. If you’re unfamiliar with
making these adjustments, we suggest that you take your instrument to your
favorite guitar technician.
Balancing Piezo / Magnetic Output
Your guitar is equipped with a piezo output control. We set this control at the
factory, so that the full volume outputs of the piezo and magnetic systems
are equal. Since string gauges and pickup height affect the output of the
magnetic pickups, you may want to change the relative levels of the two
systems by adjusting the piezo output.
To do this, remove the back plate, and adjust the small knob mounted on the
circuit board. This trim pot controls the output (gain) of the piezo pickup.
Exercise caution when removing the back plate, as the
lead wires from the battery to the circuit board
can become disconnected.
To Next Page
Loading...
Need help?
General
