STEP 6
With the strings in tune, relax the spring tension
with the balance wheel, only until the spring block
justbarely touches the step-stop.
STEP 7
Choose one of these three setups:
BALANCED– for bending up and down.
Go to STEP 8
BENDDOWN – for bending down only.
Go to STEP 9
FIXED– for non-vibrato playing. Also, use this set-
ting for changing strings and setting action and into-
nation.
Go to STEP 10.
STEP 8
Balanced Mode
For BALANCEDmode, follow STEPS 1 through
6. Then, move the step-stop up.
To Next Page
Loading...
