Need help?Do you have a question about the Parker SMOG-HOG PSG-13 and is the answer not in the manual?
General| Brand | Parker |
|---|---|
| Model | SMOG-HOG PSG-13 |
| Category | Air Cleaner |
| Language | English |
Essential guidelines to reduce risks of fire, electric shock, and injury when operating the air cleaner.
Explains the two-stage electrostatic precipitation process used by the PSG Series for contaminant removal.
Defines key terms and components of the PSG Series air cleaner systems.
Details the coding system used to identify PSG system configurations and passes.
Overview of primary components including power packs, unicells, filters, and junction boxes.
Guidelines for selecting site location and necessary clearances for access and installation.
Requirements for system supports, utility connections, and proper ducting installation.
Steps for inspecting components upon arrival and safe unloading methods.
Guidance on installing PSG systems, including leveling, connections, and electrical work.
Instructions for field electrical connections, interlocks, and compliance with codes.
Steps to perform before operating the PSG system, including component installation and initial checks.
Guidance on understanding power pack operation and interpreting indicator light status.
Details on odor filtration and automatic In-Place Cleaning system operation.
Overview of routine maintenance checks for optimal PSG system performance.
Key criteria and methods for manually cleaning SMOG-HOG® components.
Details various manual cleaning techniques like soak tanks and pressure washers.
Criteria for evaluating the cleanliness and condition of components post-cleaning.
Step-by-step guides for replacing ionizer wires, feed-thru insulators, and indicator lights.
Procedures for replacing door gaskets and adjusting the power pack enclosure push rod.
Recommendations for the frequency and method of blower bearing lubrication.
Essential tools and preliminary checks before diagnosing system issues.
Detailed steps to diagnose issues when power pack indicator lights are flashing or off.
Procedure to identify problems within the ionizer/collector cell circuits causing indicator light issues.
Instructions for measuring high voltage output and performing bench tests on components.
A guide linking common problems to their possible causes and recommended solutions.
Information on how to order replacement parts, including required details and contact information.
Procedure for returning parts to Parker for service, including RMA and freight cost details.
An illustrated list of all parts included in the power pack enclosure assembly for identification.
To Next Page
