Need help?Do you have a question about the ParkerBrand PCS-4500 and is the answer not in the manual?
General| Engine Size | 45cc |
|---|---|
| Bar Length | 18 inches |
| Fuel Tank Capacity | 550 ml |
| Oil Tank Capacity | 260 ml |
| Chain Pitch | 0.325 inches |
| Fuel Capacity | 550 ml |
| Oil Capacity | 260 ml |
| Chain Gauge | 0.058" (1.5mm) |
Guidelines on required safety equipment such as gloves, eye, and hearing protection.
Crucial safety rules for chainsaw use, fuel handling, and maintaining safe work areas.
Detailed advice on preventing and managing chainsaw kickback incidents.
Safe procedures for handling, storing, and refueling gasoline and oil mixtures.
Information on vibration effects, symptoms, and protective measures.
Guidance on transporting the chainsaw, replacing parts, and disposal.
Identification of key operational controls and chainsaw components.
Steps to check the chain brake and remove the chain cover assembly.
Procedures for attaching the bumper spike and installing the saw chain.
Instructions for fitting the guide bar onto the chainsaw.
Steps for tensioning the chain and checking its fit.
Engaging the brake, filling tanks, and using the fuel primer.
Setting the choke for cold and warm engine starts.
Setting the on/off switch and tensioning the recoil starter.
Detailed steps for starting the engine in different conditions.
Instructions for releasing and engaging the chainsaw's chain brake.
Guidelines for proper chain brake usage and its limitations.
Procedures for testing the manual and automatic chain brake functions.
How to adjust the oil flow for chain and bar lubrication.
Steps for cleaning and maintaining the air filter for optimal performance.
Procedure for removing, inspecting, and adjusting the spark plug.
Instructions for cleaning the oil and fuel filters.
Guidance on adjusting the carburettor for idle, low, and high speeds.
Guidelines for mixing fuel and safety precautions for handling.
Safe procedures for fueling the chainsaw, including precautions.
Checking accessible screws, chain catcher, and cylinder fins.
Ensuring safety labels are present and legible.
Technical specifications for the PCS-4500 power unit.
Specifications for the guide bar, saw chain, power, and vibration.
Technical specifications for the PCS-5800 power unit.
Specifications for the guide bar, saw chain, power, and vibration.
Technical specifications for the PCS-6200 power unit.
Specifications for the guide bar, saw chain, power, and vibration.
To Next Page
