Need help?Do you have a question about the PARKIT360 TRANSFORMER 15K and is the answer not in the manual?
Emphasizes the importance of reading the manual before use to prevent damage or injury.
Lists all items included in the Transformer dolly package.
Details the components included with the Ball Mount Adapter kit.
Lists the parts included with the Fifth Wheel Adapter.
Details components for the Kingpin Box Stabilizer package.
Details components for the Landing Leg Stabilizer package.
Instructions for mounting the 6.5 inch wide tires onto the dolly.
Guide to attaching the handle and securing the tightening bar.
Steps for connecting the wireless controller to the dolly handle.
Guidance on placing a 12V battery into the battery box.
Describes the two independent 1.5hp motors powering the dolly wheels.
Explains how to engage or disengage motors for manual or powered movement.
Details the automatic charging feature when plugged into a wall socket.
Explains the 7-way plug that controls trailer electric or surge brakes.
How to connect to a trailer using the Ball Mount or Kingpin Adapter.
Describes the digital meter for monitoring battery power level.
Information on controlling the dolly wirelessly from a distance.
Explains how circuit breakers prevent motor/brake overheating and how to reset them.
Instructions on how to turn the dolly's power on or off.
Details on what the volt meter measures and typical charged battery levels.
How the smart brake controls electric and surge trailer brakes.
Steps for connecting battery and charger cables to the controller's circuit board.
Instructions for charging the dolly battery using a USB phone charger.
Explains the three-position rocker switches for controlling dolly wheels independently or together.
How the wireless system enters sleep mode and how to wake it up.
Explains the meaning of different light patterns for wireless connection and battery status.
Instructions for putting the dolly into neutral to move it without power.
Steps to engage the dolly for driving, connecting to a trailer, and parking with power.
Explains the function of the spacer plate in locking the receiver tube.
Step-by-step guide to installing the spacer plate with the ball mount.
Warns against exceeding dolly's weight capacity and operating on grades over 4%.
Stresses the importance of re-tightening the ball mount before operation.
Instructions for threading the hitch ball into the ball mount and applying grease.
Guides on aligning weld spots on the hitch ball towards the trailer's rear left at 10 o'clock.
Instructions to turn the ball mount counter-clockwise until no gap remains between collar and trailer tongue.
Steps for placing a thrust washer to resolve connection gaps.
How to use the tightening bar to ensure the ball mount connection is as tight as possible.
Steps to turn on the dolly and connect the trailer's 7-pin brake cable.
Instructions to ensure the dolly is in parking position and engage both motors.
How to install the torsion loop onto the receiver tube for reinforcement.
Using toggle switches to drive the dolly under the hitch and align the adapter.
Steps to ensure the trailer is level and lower the ball mount into the receiver tube.
Using toggle switches to move the dolly and re-tighten the ball mount.
Instructions for attaching and tightening ratchet straps to the torsion loop and trailer.
Lists required accessories and tools for fifth wheel connection.
Steps to attach the kingpin adapter to the trailer's kingpin and secure it with a pin.
Specifies required measurements for kingpin adapter fitment.
Notes that kingpin stabilizer bars are standard with the fifth wheel package.
Attaching the mounting ring tube to the kingpin adapter.
Installing pivot tubes onto the mounting ring tube using bolts.
Securing the kingpin box with a coupling nut and hardware.
Attaching trailer mount tubes to the coupling nut.
Sliding inner and outer tubes into their respective mounts.
Process for drilling pilot holes for securing inner and outer tubes with D-Pins.
Final step of tightening bolts on the pivot tubes.
Installing mounting ring tubes and securing the support ring.
Attaching landing leg stabilizer bars to ring tubes and trailer legs.
Using bolts and wing nuts to lock stabilizer bars to trailer landing legs.
Freewheeling the dolly under the hitch and aligning the adapter with stabilizer bars.
Turning on the dolly and connecting the trailer's 7-pin brake cable.
Ensuring dolly is in parking position and engaging both motors.
Ensuring trailer is level and lowering the adapter into the receiver tube.
Using toggle switches or wireless controller for precise parking in tight spaces.
Chocking wheels and raising the trailer to withdraw the adapter.
Freewheeling the dolly to storage and plugging it in to charge.
Recommends greasing the receiver tube and lubricating the chain annually or more often.
Using the trailer jack post with the dolly's receiver tube.
Attaching the telescopic frame adapter to the trailer frame.
Details the warranty coverage, conditions, and exclusions for the dolly.
Outlines the procedure for returning the dolly within 30 days for a refund.
Lists items not covered by the warranty or return policy.
To Next Page
General