The blue “Wireless Sync” LED in the handle control system will be on to indicate
successful wireless communication between the transmitter and receiver.
If the receiver is not on, the blue LED will blink slowly.
The blue light will blink rapidly if the battery in the handle is getting low and needs
to be recharged.
The supplied USB cable can be connected to the charging port on the handle,
and any standard USB phone charger can be used to recharge the battery.
The USB charge port is on the side of the handle, as shown below:
When charging, the “Battery Charge” light will be red, and will turn to green when
the battery is fully charged.
14
To Next Page
Loading...
