Parkside Performance PAPS 204 A1 - Tool Safety for Battery Operation

42
GB IE
ies. All battery
repairs should
be carried out by
the manufacturer
or authorised
customer service
centres only.
Special safety
directions for
battery-
operated tools
• Ensure that
the device is
switched off be-
fore inserting the
battery. Inserting
a battery into a
power tool that
is switched on
may result in ac-
cidents.
• Recharge the
batteries indoors
only because the
battery charger
is designed for
indoor use only.
• To reduce the
electric shock
hazard, unplug
the battery
charger from the
mains before
cleaning the
charger.
• Do not subject the
battery to strong
sunlight over long
periods and do
not leave it on a
heater. Heat dam-
ages the battery
and there is a risk
of explosion.
• Allow a hot bat-
tery to cool be-
fore charging.
• Do not open up
the battery and
avoid mechan-