Parkside Performance PAPS 204 A1 - Page 46

46
GB IE
colour as the set
check mark.
8. Conrm the success-
ful connection with
„Finish“.
The battery is now
listed in the
tab
and can be selected.

If you have already
connected other de-
vices to the app:
4. On the tab
,
select the
in the
upper right. The app
scans the area for
available devices
and indicates if
available devices
have been found.
If this is not
the case, read
on if possible

.
5. Proceed as with

from point 5.

If a list of available
devices is not automati-
cally suggested to you:
If the battery is not sug-
gested automatically,
follow these steps:
4. On the tab
,
select the
in the
upper right.
5. Select „Other“ in the
bar on the left.
6. Select „Other-2“.
7. Conrm that the dis-
play is ashing rapid-
ly. The app now se-
arches for available
devices and suggests
them to you.
8. Select the desired
battery by pressing
the
to add it to
the app.
9. First conrm with
„Next“, then with
„Finish“.