Parkside Performance PAPS 204 A1 - App: Locking the Battery; App: Battery Work Mode Selection; App: Overheating Notifications

48
GB IE
curve, charging current
curve, the discharge cur-
rent curve and capacity
curve of the battery.
The red line in the
temperature diagram
shows the threshold to
overheating. The black
line shows the current
battery temperature.
• Locking the
battery
Here you can lock the
battery against use by
specifying and conr-
ming a PIN.
You will then need the
PIN again to unlock the
battery.
• Battery work
mode
Here you can select
between the different
work modes: Perfor-
mance, Balance, ECO
and Expert.
The low discharge
voltage and max. cont-
inual discharge current
change depending on
the work mode.
You can set the low
discharge voltage and
max. continual dischar-
ge current yourself in
Expert mode by selec-
ting this mode and then
setting and conrming
the desired value in the
list provided.
• Notication
Here you can select to
receive a notication
on your smartphone if
the battery exceeds the
overheating threshold.
To do this, select the
„Overheated Alarm
Switch“ eld.
You can illuminate
the battery’s charge
level indicator using