Parkside Performance PAPS 208 A1 User Manual

43
GB MT
on charging in the
instruction manual
for your (PARK-
SIDE) X20VTeam
series tool and
charger.
Operation
Removing/
inserting the
Battery
Only insert the re-
chargeable bat-
tery once the bat-
tery-operated tool is
ready for use. Risk of
injury!
1. To remove the bat-
tery (4) from the
appliance, press the
release button (1) on
the battery and pull
out the battery.
2. To insert the battery
(4), place it on the
guide track and push
it into the appliance. It
will audibly snap in.
Checking the
charge status of
the rechargeable
battery
The battery charge sta-
tus indicator (3) signal-
ises the state of charge
of the battery (4).
Press the button (2) on
the battery. The state of
charge of the battery
is displayed by illumi-
nating the 3-colour LED
lights of the state of
charge display.
3 LEDs light up (red,
orange and green):
Battery is fully charged.

Parkside Performance PAPS 208 A1 Specifications

General

Brand	Parkside Performance
Model	PAPS 208 A1
Category	Battery Pack
Language	English