MTGB
23
The device has a usable angle of
0-165° ((the maximum angle is only
possible on a tripod). Do not use the de-
vice outside of this range.
Tripod mount
You can use the inner thread (6) to screw
the device onto a tripod (not included in
this package).
Connecting the device
to the Parkside app
Only Smart Performance batteries
can be connected to the Parkside
app. The device connects to the app via
the battery.
1. Place Smart Performance batteries (19)
in the device. You will hear them click
into place.
2. Press the On/Off switch (10).
The device is now activated and the
Smart LED
(7) ashes (briey).
3. Enable Bluetooth
®
on your smartphone.
4. Open the Parkside app.
5. Select
.
If you have already connected
the Smart Performance battery
you are using the device with to the
app, you will nd the device in the list
of connected devices.
6. Select the device from the list.
If it is not available, pair the device
with the app as follows:
1. Select “
Add device” or, if you have
already paired devices/batteries, the
at the top right.
2. Follow the instructions in the app. The
app scans the surroundings for avail-
able devices.
3. Select the device you wish to add.
4. You can rename the device if neces-
sary. Conrm the successful pairing
with “Done” or select “Add more de-
vices” directly.
The device is now listed under
in your
paired devices and can be selected.
Upgrading the rmware can change
the features of the app.
Features of the app
Selecting the device in the list under
will take you to the overview page.
For more detailed information on in-
dividual points, select the
.
Privacy policy
You can nd the complete “ Privacy
Policy” at
.
Unpairing the device and
deleting data from the app
Go to to select the device you want
to remove and whose data you want to
delete, press and hold the selection and
swipe from the right to the left edge of the
screen
.
Problems with the app? –
FAQ
1. Select .
2. Select
Frequently Asked Questions.
Here you will nd frequently asked
questions and the corresponding an-
swers.