To Next PageTo Next Page
Need help?Do you have a question about the Parkside PABS 20-Li D4 and is the answer not in the manual?
General| Battery Voltage | 20 V |
|---|---|
| Battery Type | Lithium-Ion |
| No-load Speed | 0-400 / 0-1400 rpm |
| Spindle Lock | Yes |
| Integrated LED Work Light | Yes |
Appliance designed for screwing and drilling wood, plastic, and metal. Not for commercial use.
Lists key components: Gear selector, bit holder, rotational direction switch, ON/OFF switch, belt clip, etc.
Lists included items: cordless drill, charger, battery pack, bit, case, and operating instructions.
Specifies voltage, speed, drill diameter, battery type, charger input/output, and charging time.
Keep area clean, well-lit, and free from flammable substances. Keep children and bystanders away.
Ensure proper plug match, avoid body contact with earthed surfaces, and protect from rain/wet.
Stay alert, use PPE, wear eye protection, prevent unintentional starting, and maintain balance.
Use correct tool, maintain tools, store properly, and follow instructions for safe operation.
Charge with recommended chargers, use supplied batteries, store away from metal objects.
Hold by insulated grips to prevent contact with hidden wiring and electric shock.
Supervise children, charger for indoor use only, replace damaged mains cables.
Charge with charger, observe temperature limits, check LED indicators for status.
Insert until click; press release button to remove.
Press button to view charge level via LED indicators.
Utilizes automatic spindle lock; adjust chuck when motor is stopped.
Adjust torque for screws or select drill setting.
Operate gear selector switch 1 at standstill. Gear 1 (400 rpm), Gear 2 (1400 rpm).
Use ON/OFF switch 4 to start/stop. LED work light illuminates when pressed.
Variable speed control via ON/OFF switch 4; pressure determines speed.
Use rotational direction switch 3 to toggle between left and right rotation.
Check bit positioning, use correct torque/speed, and follow drilling advice for best results.
Use HSS drills, cool with oil, start with 3mm bit and increase size.
Use wood drills with centre, auger bits for deep, Forstner bits for large holes.
Warranty valid from purchase date; requires receipt. Repair or replacement at discretion.
Period not prolonged by repairs; report defects immediately after unpacking.
Contact details for service in Great Britain, including phone and email.
Contact details for service in Ireland, including phone and email.
Details for Kompernass Handels GmbH, including address and website.
Dispose of packaging environmentally. Note labelling for material separation.
Do not dispose of power tools in household waste; recycle according to EU directives.
Do not dispose of batteries in domestic waste; recycle defective/worn-out batteries.
Declaration of compliance with EU directives and harmonised standards.
Type designation, year of manufacture, serial number, and date of declaration.
Order online via kompernass.com or by telephone. Price includes VAT and shipping.
Contact service hotlines for Great Britain and Ireland. Use article number for fast processing.
