To Next PageTo Next PageWhat to do if my Parkside PAH 1700 C4 Power Hammer does not work?
If your Parkside Power Hammer isn't working, first check the power cord and plug to ensure they are properly connected and functioning. If the issue persists, the carbon brushes may be worn out, requiring replacement by a qualified specialist. In case of a defective motor, it's recommended to have the product repaired by a qualified specialist.
Why is my Parkside PAH 1700 C4's performance so poor?
If your Parkside Power Hammer's performance is poor due to a blunt chisel, try using a new chisel. Also, ensure you are applying appropriate pressure and that the stroke rate is adequately set. Increase the stroke rate if it is set too low.
General| Brand | Parkside |
|---|---|
| Model | PAH 1700 C4 |
| Category | Power Hammer |
| Language | English |
Essential safety guidelines applicable to all power tools.
Covers safe working environments and avoiding hazards.
Precautions regarding electrical connections and preventing shocks.
Emphasizes alertness, using PPE, and preventing unintentional starts.
Guidelines for correct operation, maintenance, and handling.
Specific safety advice for demolition hammers, including noise and handling.
Methods to minimize exposure to vibration and noise during operation.
Guidance on reacting to malfunctions or emergency scenarios.
Instructions for putting together the product and its parts.
Solutions for common problems encountered with the tool.
