Parkside PAS 4 B4 - Page 7

PAS 4 B4
■ 4 │ GB
│
IE
│
NI
│
CY
Use only the following charger to charge the cordless
tool:
PAS 4 B4-2:
INPUT:
Rated voltage: 100–240 V ∼ 50–60 Hz (AC)
Rated current: 16W
OUTPUT:
Rated voltage: 5.0 V
(DC)
Rated current: 1700 mA
Charging time: approx. 1 hr
Protection class: II /
(double insulation)
Noise and vibration information:
The measured values have been determined in accordance with
EN62841. The A-rated noise level of the tool is typically:
Sound pressure level: L
PA
= 56.4 dB (A)
Sound power level: L
WA
= 67.4 dB(A)
Uncertainty K: K
pA/WA
= 3 dB
Vibration values (vector total of three directions) determined in
accordance with EN 62841:
Screws:
Vibration emission value: a
h
= 0.412 m/s
2
Uncertainty: K = 1.5 m/s
2