PBK 4 A1
GB
│
IE
│
NI
│
1 ■
Contents
Introduction ................................... 2
Intended use ...........................................2
Features ...............................................2
Package contents........................................3
Technical data ..........................................3
Explanation of the symbols used ...........................4
Safety instructions.............................. 6
Operational safety instructions for hedge trimmers ..............6
Supplementary safety instructions for hedge trimmers............7
Operational safety instructions for pole pruners ................7
Precautions against kickback...............................8
Operational safety instructions for strimmers...................8
Operational safety instructions for cutting blades ...............9
Safety devices/equipment ................................9
Before use ................................... 10
Attaching the round handle...............................10
Assembling the quick release mechanism . . . . . . . . . . . . . . . . . . . .10
Assembling the hedge trimmer ............................10
Removing the hedge trimmer..............................10
Swivelling the hedge trimmer..............................10
Mounting the saw chain and blade ........................10
Removing the saw chain .................................10
Tightening and checking the saw chain .....................11
Lubricating the chain ....................................11
Sharpening the saw chain................................11
Attaching the extension attachment.........................11
Fitting/removing the protective guard .......................11
Installing/replacing the cutting blade .......................11
Installing/replacing the strimmer ...........................12
Putting on the carrying harness ............................12
Setting the cutting height .................................12
Fuel and oil ...........................................12
Use ......................................... 12
Starting when the engine is cold ...........................12
Starting when the engine is hot ............................12
Working with the hedge trimmer ...........................13
Cutting techniques ......................................13
Working with the pole pruner .............................13
Sawing techniques .....................................13
Working safely ........................................14
Transport .................................... 14
Cleaning ..................................... 14
Maintenance ................................. 14
Storage and transportation ..................... 15
Troubleshooting............................... 16
Engine unit............................................16
Pole pruner ...........................................16
Hedge trimmer.........................................16
Maintenance intervals ......................... 16
Pole pruner ...........................................16
Hedge trimmer.........................................16
Ordering spare parts .......................... 16
Disposal ..................................... 17
Kompernass Handels GmbH warranty............ 17
Service ...................................... 18
Importer..................................... 18
Translation of the original Conformity Declaration . . 18