Parkside PBRM 39 C2 - User Manual

Questions and Answers

K
Kevin KnappAug 3, 2025
Why won't my Parkside PBRM 39 C2 Lawn Mower engine start?
- C
  Caitlin BrownAug 3, 2025
  Your Parkside Lawn Mower engine may not start due to several reasons: the engine brake lever might not be pressed, so ensure you press it. The throttle could be in the wrong position, so check its setting. The spark plug might be defective and require replacement. The fuel tank could be empty, requiring a refill. The fuel could be contaminated, in which case you should empty the tank and refill it with clean fuel. In the event that none of these solutions work, the engine may be defective, and you should contact authorised customer service.
W
wilsonmariahAug 7, 2025
What to do if the discharge of grass clippings is unclean for Parkside PBRM 39 C2 Lawn Mower?
- C
  Christopher BonillaAug 7, 2025
  If your Parkside Lawn Mower isn't discharging grass cleanly, it could be due to a few reasons. The cutting height might be too low, so adjust it. The blade could be worn, in which case you should replace it. The grass collection basket might be blocked, so empty it or remove any blockages.
E
Erica PatelAug 11, 2025
Why is my Parkside Lawn Mower leaving yellow patches and uneven cuts?
- W
  wlopezAug 11, 2025
  If your Parkside Lawn Mower is causing the lawn to turn yellow or resulting in uneven mowing, the blade may be blunt and needs sharpening. Also, check if the cutting height is set too low and adjust it to the correct height.
T
Thomas JohnsonAug 16, 2025
What to do if Parkside PBRM 39 C2 Lawn Mower runs unsteadily and vibrates heavily?
- T
  Tommy AyersAug 16, 2025
  If your Parkside Lawn Mower runs unsteadily and vibrates heavily, check the screws and blade fasteners to ensure they are not loose. If the blade is unbalanced, replace it.
S
Sandra GreenAug 19, 2025
What to do if Parkside Lawn Mower discharge of grass clippings is unclean?
- S
  Stephen HallAug 20, 2025
  If the discharge of grass clippings from your Parkside Lawn Mower is unclean, it might be because the cutting height is too low. Try adjusting the cutting height. Another reason could be a worn blade, which should be replaced. Also, check if the grass collection basket is blocked; if so, empty it or remove the blockage.
J
Jason LambAug 25, 2025
What to do if my Parkside Lawn Mower engine does not run?
- I
  itaylorAug 25, 2025
  If your Parkside Lawn Mower engine won't start, make sure the engine brake lever is pressed. Check the throttle position and replace the spark plug if it's defective. Refill the fuel tank if empty, or empty and refill with clean fuel if contaminated. In cold environments, press the fuel pump primer. If none of these steps work, the engine may be defective, and you should contact authorised customer service.
J
Jeff TaylorAug 29, 2025
Why does my Parkside PBRM 39 C2 Lawn Mower engine run unsteadily?
- M
  Michael WalkerAug 29, 2025
  If your Parkside Lawn Mower is running unsteadily, the air filter or spark plug may be dirty. Try cleaning the air filter and spark plug.

Parkside PBRM 39 C2 Specifications

General

Engine type	Electric
Cutting width	39 cm
Collection bag capacity	40 L
Voltage	230 V
Frequency	50 Hz
Power	1300 W

Summary

Explanation of Symbols

Hazard Identification Symbols

Explains symbols for hazards like injury, burning, poisoning, and environmental risks.

Operational Guidance Symbols

Covers symbols for pre-operation, refueling, oil checks, and engine brake operation.

PPE and Product Information

Highlights symbols for PPE and general product information like noise and CE marking.

Introduction and Manufacturer Information

Manufacturer, Liability & Manual Guidance

Details manufacturer info, liability disclaimers, and manual importance for safe operation.

Trained Personnel & Pre-Operation Safety

Emphasizes using trained personnel and reading safety instructions before initial use.

Product Description & Scope of Delivery

Key Components and Included Parts

Identifies key product components and lists all items included in the delivery package.

Proper Use Guidelines

Intended Use, Safety & Original Parts

Covers intended use, adherence to safety, and the importance of using original parts.

Non-Commercial Use Disclaimer

Clarifies the product is not designed for commercial use and disclaims guarantee for such applications.

Safety Instructions

User and Operational Safety

Covers prohibited users, safe mowing practices, visibility, slope operation, and terrain checks.

Fuel, Fire, and Environmental Safety

Details safe fuel handling, storage, fire prevention, ventilation, and environmental risks.

Safety Instructions (Continued)

Mechanical, Maintenance & Hazardous Conditions Safety

Addresses blade stopping, guards, equipment integrity, and hazards from conditions and user behavior.

Residual Risks, Noise & Emergency Procedures

Covers residual dangers, noise hazards, and essential steps for handling emergencies.

Technical Data

Product Specifications

Lists key technical specifications like motor type, displacement, power, fuel, and oil requirements.

Unpacking and Initial Checks

Unpacking Procedures

Covers removing product from packaging, disposing of materials, and checking for damage.

Pre-Assembly Considerations

Emphasizes familiarization, use of original parts, and packaging safety warnings.

Assembly

Assembly Safety and Tools

Highlights blade safety during assembly and lists required tools for the process.

Lower Push Bar Installation

Provides step-by-step instructions for fitting the lower push bar to the lawnmower.

Assembly (Continued)

Upper Push Bar and Pull Starter Attachment

Details mounting the upper push bars and attaching the pull starter for operation.

Wheel Installation Procedure

Step-by-step guide for fitting the wheels, including washers, screws, and caps.

Before Commissioning

Safety, Component & Readiness Checks

Covers health hazards, product damage risks, environmental concerns, and operational readiness.

Engine Oil Filling Procedure

Detailed instructions on how to fill the engine with the correct type and amount of oil.

Before Commissioning (Continued)

Fueling and Start-up Procedures

Covers safely filling the fuel tank and the initial engine start-up process.

Pre-Mowing Preparations

Details checking the blade stop, preparing the mowing area, and adjusting the cutting height.

Start-up

Blade Stop Check & Mowing Area Prep

Covers checking the blade stop device and preparing the mowing area for safe operation.

Cutting Height Adjustment

Instructions on how to adjust the cutting height for optimal mowing performance.

Operation

General Mowing Practices

Provides tips for efficient and clean mowing, including path overlap and housing maintenance.

Using the Grass Collection Basket

Instructions for inserting and utilizing the grass collection basket during mowing.

Operation (Continued)

Grass Basket Management & Engine Operations

Covers emptying the grass basket, safe engine starting, and shut-off procedures.

Post-Operation and Cleaning Safety

Details post-mowing actions and critical safety measures required before cleaning.

Cleaning

General Cleaning Safety

Highlights essential safety precautions required before and during the cleaning process.

Health and Environmental Safety

Warns about health hazards from fuel/oil vapors and potential environmental impact of cleaning.

Cleaning (Continued)

Cleaning Procedures and Precautions

Covers cleaning methods, tilting precautions, and specific undercarriage cleaning steps.

Transport

Transport Safety Precautions

Emphasizes safety measures like engine shutdown and spark plug disconnection before transport.

Fuel, Oil Draining & Push Bar Folding

Details draining fuel/oil and folding the push bar for space-saving and safe transport.

Securing Vehicle Load

Stresses securing the product properly to prevent tipping or slipping during vehicle transport.

Storage

Storage Preparation and Environment

Covers pre-storage maintenance, basket condition, storage environment, and fuel safety.

Long-Term Storage Guidelines

Details specific procedures for preparing the lawnmower for extended periods of non-use.

Maintenance

General Maintenance Safety

Emphasizes safety, specialist work, and using original parts for all maintenance tasks.

Routine Maintenance Checks

Lists essential checks for fasteners, wheels, and grass basket, plus wheel axle cleaning recommendations.

Maintenance (Continued)

Blade and Oil Maintenance

Covers blade replacement, handling damaged blades, and checking/changing engine oil.

Fuel System Maintenance

Details procedures for draining the fuel tank and carburetor for maintenance or storage.

Maintenance (Continued)

Air Filter and Spark Plug Maintenance

Covers air filter cleaning safety, damage risks, and spark plug maintenance procedures.

Engine Brake and Blade Checks

Details checking the engine brake lever functionality and guidance for damaged blades.

Repair & Ordering Spare Parts

Repair Safety and Spare Parts Ordering

Emphasizes safety during repairs, using original parts, and providing info for ordering spares.

Service Information

Highlights wearing parts and directs users to service centers and QR codes for parts.

Disposal and Recycling

Packaging Disposal

Recommends environmentally friendly disposal of packaging materials.

Fuel and Oil Disposal

Instructs on the proper disposal of fuels and oils, preventing environmental contamination.

Troubleshooting

Unsteady Running and Vibration

Addresses causes and remedies for the product running unsteadily or vibrating heavily.

Engine Failure to Start

Lists common causes and solutions for the engine not running at all.

Unsteady Engine Operation

Provides troubleshooting steps for when the engine runs unsteadily.

Lawn Condition and Grass Discharge Issues

Addresses causes for yellowing lawns or uneven mowing and grass discharge problems.

EU Declaration of Conformity

Manufacturers Compliance Statement

Declares product compliance with EU directives, standards, and includes technical specifications.

Warranty Certificate

Guarantee Terms and Claims Process

Details the guarantee period, conditions, exclusions, and how to make a claim.

Service Access and Online Resources

Provides contact information for service partners and directs users to online resources.

Related product manuals

Parkside PMRA 20-Li A1

408 pages

Parkside PMRA 20-Li B2

388 pages

Parkside PRMA 20-Li B2

87 pages

Parkside PMRDA 20-Li A1

456 pages

Parkside PPRMA 40 Li A1

392 pages

Parkside PMRDA 20-Li B2

68 pages

Parkside PBRM 39 C2 - User Manual

Table of Contents

Questions and Answers

Parkside PBRM 39 C2 Specifications

Summary

Explanation of Symbols

Hazard Identification Symbols

Operational Guidance Symbols

PPE and Product Information

Introduction and Manufacturer Information

Manufacturer, Liability & Manual Guidance

Trained Personnel & Pre-Operation Safety

Product Description & Scope of Delivery

Key Components and Included Parts

Proper Use Guidelines

Intended Use, Safety & Original Parts

Non-Commercial Use Disclaimer

Safety Instructions

User and Operational Safety

Fuel, Fire, and Environmental Safety

Safety Instructions (Continued)

Mechanical, Maintenance & Hazardous Conditions Safety

Residual Risks, Noise & Emergency Procedures

Technical Data

Product Specifications

Unpacking and Initial Checks

Unpacking Procedures

Pre-Assembly Considerations

Assembly

Assembly Safety and Tools

Lower Push Bar Installation

Assembly (Continued)

Upper Push Bar and Pull Starter Attachment

Wheel Installation Procedure

Before Commissioning

Safety, Component & Readiness Checks

Engine Oil Filling Procedure

Before Commissioning (Continued)

Fueling and Start-up Procedures

Pre-Mowing Preparations

Start-up

Blade Stop Check & Mowing Area Prep

Cutting Height Adjustment

Operation

General Mowing Practices

Using the Grass Collection Basket

Operation (Continued)

Grass Basket Management & Engine Operations

Post-Operation and Cleaning Safety

Cleaning

General Cleaning Safety

Health and Environmental Safety

Cleaning (Continued)

Cleaning Procedures and Precautions

Transport

Transport Safety Precautions

Fuel, Oil Draining & Push Bar Folding

Securing Vehicle Load

Storage

Storage Preparation and Environment

Long-Term Storage Guidelines

Maintenance

General Maintenance Safety

Routine Maintenance Checks

Maintenance (Continued)

Blade and Oil Maintenance

Fuel System Maintenance

Maintenance (Continued)

Air Filter and Spark Plug Maintenance

Engine Brake and Blade Checks

Repair & Ordering Spare Parts

Repair Safety and Spare Parts Ordering

Service Information

Disposal and Recycling

Packaging Disposal

Fuel and Oil Disposal

Troubleshooting

Unsteady Running and Vibration

Engine Failure to Start

Unsteady Engine Operation