5
GB IE NI
General description
The illustrations are on the
front and back fold-out page.
Extent of the delivery
Carefully unpack the appliance and check
that it is complete:
- Cordless Drill
- 2 bits: PH1 50 mm and PH2 50 mm
- Storage case
- Instruction Manual
Overview
1 Drill chuck aperture
2 Keyless drill chuck
3 Torque adjustment ring
4 Speed selector
5 On/off switch
6 Direction of rotation switch
7 Bit holder
8 PH1 50 mm bit
9 PH2 50 mm bit
10 LED working light
11 B a t t e r y
11a Battery release button
12 Battery Indicator
12a Button for charge status display
13 Charger
14 Storage case
15 Metal belt clip
Functional description
The cordless drill with two-speed gearing
has a 25+1 level torque adjustment, left/
right running, a removable keyless chuck
and an LED working light.
Technical data
Cordless Drill ........... PBSA 20-Li A1
Motor voltage U ..........................20 V
Idling speed n
0
1st gear ............................ 0-400 min
-1
2nd gear .........................0-1400 min
-1
Maximum torque ..........................35 Nm
Span-chuck ............................1.5-13 mm
Weight (without battery charger) .... 1.6 kg
Drilling capacity
for wood .......................... max. 30 mm
for steel ........................... max. 13 mm
Sound power level
(L
pA
) ................... 71.4 dB(A), K
pA
= 3 dB
Sound power level
(L
WA
) ................. 82.4 dB(A); K
WA
= 3 dB
Vibration (a
h
)
max. ...............< 2.5 m/s
2
; K= 1.5 m/s
2
Noise and vibration values have been de-
termined according to the standards and
regulations mentioned in the declaration of
conformity.
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to
compare one power tool to another.
The stated vibration emission value may
also be used for a preliminary exposure
assessment.
Warning: The vibration emission
value may differ during actual use of
the power tool from the stated value
To Next Page
Loading...
