To Next PageTo Next Page
Need help?Do you have a question about the Parkside PDSSAP 20-Li B2 and is the answer not in the manual?
General| Battery Voltage | 20 V |
|---|---|
| Max Torque | 180 Nm |
| No-load Speed | 0-2800 rpm |
| Weight | 1.2 kg |
| Battery Type | Lithium-ion |
| Tool Holder | 1/4" hex |
| Chuck Type | 1/4" hex |
Guidelines for maintaining a safe and organized work environment to prevent accidents.
Precautions related to electrical hazards, including grounding and wet conditions.
Recommendations for personal protective equipment and safe operating practices to avoid injury.
Specific safety advice tailored for the operation of impact wrenches.
Recommendations for using only approved accessories and additional equipment.
Detailed instructions on how to charge the battery pack using the recommended charger.
Step-by-step guide on how to insert and remove the battery pack from the tool.
Instructions on how to check the remaining charge level of the battery pack.
Guidance on how to attach the belt clip to the appliance.
Instructions for operating the ON/OFF switch to start and stop the tool.
How to adjust the rotation speed and preselect the tightening torque for different applications.
Instructions on how to switch between clockwise and anti-clockwise rotation.
Procedure for inserting and removing tool accessories from the tool holder.
Guidelines for keeping the appliance clean, dry, and in good working order.
Information on how to properly dispose of the appliance and packaging according to environmental regulations.
Conditions and requirements for claiming the product warranty, including proof of purchase.
Information on the warranty duration and how statutory consumer rights apply.
Defines what is covered by the warranty, exclusions, and limitations of use.
Contact details for service centres in Great Britain and Ireland for repairs and support.
Details of the importer, Kompernass Handels GmbH, and their address.
Guidance on how to order replacement parts by telephone, including required information.
