Parkside PFDS 120 A2 User Manual

IAN 303284_1907
FÜLLDRAHT - SCHWEISSGERÄT
Bedienungs- und Sicherheitshinweise
Originalbetriebsanleitung
DE AT CH
FLUX CORED WIRE WELDER PFDS 120 A2
FLUX CORED WIRE WELDER
Operation and Safety Notes
Translation of the original instructions
GB
IE NI
GB IE NI
303284_Fülldrahtschweißgerät_PFDS_120_A2_cover_LB6_GB-IE-NI.indd 3303284_Fülldrahtschweißgerät_PFDS_120_A2_cover_LB6_GB-IE-NI.indd 3 11.12.2019 10:14:4511.12.2019 10:14:45

Parkside PFDS 120 A2 Specifications

General

Input Voltage	230 V~ 50 Hz
Protection Class	IP21S
Electrode Diameter	1.6-3.2 mm
Cable Length with Electrode Holder	2 m
Cable Length with Earth Clamp	2 m

Summary

Introduction and Specifications

Intended Use and Product Overview

Defines the specific applications and provides an overview of the welding device.

Delivery Contents and Parts Description

Lists all items included and identifies the main components of the device.

Technical Specifications

Details the electrical, performance, and physical characteristics of the welder.

Safety Notes

General Safety, User Restrictions, and Workplace Practices

Covers general safety, age/capability limits, electrical connection, and workplace setup.

Welding Hazards and Protective Measures

Details risks from arc radiation, sparks, heat, and protective clothing requirements.

Specific Risk Scenarios and Environmental Considerations

Safety measures for hazardous environments and risks from confined spaces.

Assembly

Assembling the Welding Mask

Step-by-step guide to assembling the welding mask.

Inserting the Flux-Cored Wire

Instructions for correctly loading the flux-cored wire into the feeder.

Commissioning

Switching the Device On and Off

Procedure for safely powering the welding device on and off.

Setting the Welding Current and Wire Feed

Guidance on adjusting welding current and wire feed speed for optimal results.

Welding Operation

Welding Mask Usage and Safety

Emphasizes the importance of the welding mask for eye and skin protection.

Creating a Weld: Techniques and Settings

Step-by-step guide to generating an arc, forming a weld, and adjusting settings.

Maintenance and Disposal

Maintenance, Cleaning, and Servicing

Guidelines for regular servicing, cleaning, and upkeep of the device.

Information about Recycling and Disposal

Instructions for environmentally friendly recycling and disposal of the device.

Warranty and Service Information

Warranty Conditions and Processing

Details warranty conditions, period, exclusions, and claim processing.