EasyManuals Logo

Parkside PFMR 1600 C3 User Manual

Parkside PFMR 1600 C3
95 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #10 background imageLoading...
Page #10 background image
11 GB
Service
1) Have your power tool serviced by
a qualified repair person using only
identical replacement parts. This will
ensure that the safety of the power tool is
maintained.
Mixer safety instructions
1. Hold the tool with both hands at the
intended handles. Loss of control can
cause personal injury.
2. Ensure sufficient ventilation when
mixing flammable materials to avoid
a hazardous atmosphere. Developing
vapour may be inhaled or be ignited by the
sparks the power tool produces.
3. Do not mix food. Power tools and their
accessories are not designed for processing
food.
4. Keep the cord away from the
working area. The cord may be
entangled by the mixer basket.
5. Ensure that the mixing container is
placed in a firm and secure position.
A container that is not properly secured may
move unexpectedly.
6. Ensure that no liquid splashes
against the housing of the power
tool. Liquid that has penetrated the power
tool can cause damage and lead to electric
shock.
7. Follow the instructions and warnings
for the material to be mixed. Material
to be mixed may be harmful.
8. If the power tool falls into the
material to be mixed, unplug the
tool immediately and have the
power tool checked by a qualified
repair person. Reaching into the bucket
with the tool still plugged in can lead to
electric shock.
9. Do not reach into the mixing
container with your hands or insert
any other objects into it while
mixing. Contact with the mixer basket may
lead to serious personal injury.
10. Start up and run down the tool in the
mixing container only. The mixer basket
may bend or spin in an uncontrolled manner.
Additional safety instructions of
operating mixer
The power tool must never be used in
surroundings where an explosive atmosphere
exists.
Never mix any materials containing
flammable solvent or substance.
Make sure mixing stirrer is placed inside the
mixing container when power tool is switched
ON.
Make sure power tool is completely stopped
prior to taking out the stirrer from mixing
container.
Always wear safety goggles to operate the
power tool.
Do not wear loose-fitting clothes to operate
the power tool.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Parkside PFMR 1600 C3 and is the answer not in the manual?

Parkside PFMR 1600 C3 Specifications

General IconGeneral
BrandParkside
ModelPFMR 1600 C3
CategoryHand Mixer
LanguageEnglish