9GB
Parts list
Fig. A
[1] Front hand protection
[2] Handgrip area
[3] Switch lock
[4] On/off switch
[5] Handle
[6] Rear hand protection
[7] Sprocket cover
[8] Mounting screw
[9] Blade bar (guide rail)
[] Saw chain
[] Blade encasing
Fig. B/C
[] Battery pack*
[] Button (charging level)
[] Charging level LEDs (red/orange/green)
[] Release button for battery pack
[] Battery charger (rapid battery charger)*
[] Charging control LED – Red
[] Charging control LED – Green
[] Power cord with power plug
* Battery pack and charger are not included.
Technical data
20V cordless pruning saw PGHSA
20-Li B1
Rated input voltage 20V
Protection category IP20
Chain bar : Hangzhou
Fangcheng Tools
Manufacture Co., Ltd. 030
Chain : Hangzhou
Fangcheng Tools
Manufacture Co., Ltd. 030.043.32
Chain pitch 1/3” (8.5mm)
Chain width 1.1mm
Teeth of the sprocket
chain wheel 6
Length of the chain bar
approx. 192mm
Sawing length 160mm
Weight (without
charger+ batteries) approx. 1.42kg
Switch lock
The switch-on block must be released for
switching on the product.
On-off switch with safety chain brake
On releasing the On/Off switch, the product
immediately switches off.
Handle with rear hand protection
Protects the hand against branches and boughs
in the case of springing away by the chain.
Saw chain with small spring-back
Helps you to catch spring-backs with specially
developed control systems.
Recommended ambient temperature
Temperature max 50 °C
Charging process 4−40 °C
Operation -20−50 °C
Storage 0−45 °C
Noise emission value
The measured values have been determined in
accordance with EN 62841. The A-rated noise
level of the power tool is typically as follows:
434668_2304_CZ_SK_HU_SI_02.indb 9434668_2304_CZ_SK_HU_SI_02.indb 9 11/3/2023 12:17:23 PM11/3/2023 12:17:23 PM
To Next Page
Loading...
Need help?
General
