Parkside PGK 1400 B2 - User Manual

Questions and Answers

M
melissa74Aug 12, 2025
Why won't my Parkside PGK 1400 B2 Tiller start?
- B
  bryan03Aug 12, 2025
  If your Parkside Tiller doesn't start, there could be several reasons. First, check the socket, mains supply cable, cord, and mains plug to ensure they are working; if necessary, have them repaired by a qualified electrician and check the main fuse. Another potential cause is a defective release button or start handle, which requires repair by Customer Care. Also, worn out carbon brushes or a defective motor could be the reason.
J
Julia Patterson PhDAug 18, 2025
What to do if Parkside PGK 1400 B2 has strong vibrations?
- D
  David JohnsonAug 18, 2025
  If your Parkside Tiller is vibrating strongly, it could be due to a damaged chopper, which would need replacing. Another cause could be that the working depth is set too low; try adjusting it to a more suitable level.
J
John MarshallAug 27, 2025
Why is my Parkside PGK 1400 B2 Tiller making unusual sounds?
- V
  Veronica HardingAug 27, 2025
  Unusual sounds from your Parkside Tiller can stem from a few issues. The chopper might be blocked; try loosening any blockages. Alternatively, the chopper could be damaged and in need of replacement. Also, check all screws and nuts for tightness and retighten if necessary. If the noises persist, contact Customer Care.
J
Justin LewisSep 3, 2025
How to improve poor work output of Parkside Tiller?
- W
  William SchmittSep 3, 2025
  If your Parkside Tiller's work output is poor, check if the chopper is fitted correctly and, if not, fit it correctly. Also, the chopper might be blunt or damaged, in which case you should replace it.