Parkside PHD 170 B2 - Translation of the Original EC Declaration of Conformity

104
GB
IE
Translation of the original EC
declaration of conformity
We hereby conrm that the
Pressure washer
Design Series PHD 170 B2
Serial Number
000001 - 480000
conforms with the following applicable relevant version of the EU guidelines :
2014/30/EU • 2000/14/EC • 2006/42/EC • 2005/88/EC
2011/65/EU* • (EU) 2015/863
In order to guarantee consistency, the following harmonised standards as well as national
standards and stipulations have been applied:
EN 60335-1:2012/A2:2019 • EN 60335-2-79:2012
EN 55014-1:2017 • EN 55014-2:2015 • EN 62233:2008
EN IEC 61000-3-2:2019 • EN 61000-3-11:2000 • EN IEC 63000:2018
We additionally conrm the following in accordance with the 2000/14/EC emissions
guideline:
Sound power level
guaranteed: 97 dB(A)
measured: 94,3 dB(A)
Compliance evaluation process carried out in accordance with
Appendix III, 2000/14/EC
This declaration of conformity is issued under the sole responsibility of the manufacturer:
Christian Frank
Documentation Representative
Grizzly Tools GmbH & Co. KG
Stockstädter Straße 20
63762 Großostheim
Germany
01.10.2020
* The object of the declaration described above satises the provisions of Directive 2011/65/
EU of the European Parliament and the Council of 8 June 2011 on limiting the use of certain
harmful substances in electrical and electronic appliances