Parkside PHD 170 B2 - Electrical safety

23
IE
GB
• Use only original accessories
and do not carry out conver-
sion work on the equipment.
• Please read the notes in the
operating instructions on the
topic of “maintenance and
cleaning”. Any measures
above and beyond these,
particularly opening the equip-
ment, are to be carried out
by an authorised electrician.
In the case of repairs, always
contact our service centre.
Electrical safety:
Caution: to avoid ac-
cidents and injuries
from electric shocks:
• The plug and socket of an ex-
tension cable must be water-
tight!
Unsuitable extension ca-
bles can be dangerous as
people can be harmed by
an electric shock!
• Protect the electric plug con-
nections against moisture.
• If there is a risk of ooding,
x the plug connections in an
area that is safe from ooding.
• Ensure that the mains voltage
matches the specications on
the rating plate.
• Connection to the mains
must be carried out by an
experienced electrician and
meet the requirements of
IEC60364-1.
• The electrical installation
shall be according to nation-
al wiring rules.
• Take appropriate measures to
keep children away from the
equipment whilst it is running.
• Do not use the equipment
in the vicinity of ammable
liquids or gases. Non-obser-
vance will result in a risk of
re or explosion.
• Do not spray combustible liq-
uids. Risk of explosion.
• If you come into contact with
cleaning agents, rinse with
plenty of clean water.
• Store the equipment in a dry
place and out of reach of
children.
Caution! To avoid
damage to the equip-
ment and any pos-
sible person injury
resulting from this:
• Do not work with damaged
or incomplete equipment, or
with equipment that has been
converted without the ap-
proval of the manufacturer.
Before initial operation, have
a specialist check that the
required electrical protection
measures are in place.
• Do not operate the equip-
ment if the mains cable, wa-
ter supply or other important
parts such as the high-pres-
sure hose or gun are dam-
aged/leaking.
• Protect the pressure cleaner
from frost and dry running.
• High-pressure hoses, ttings
and couplings are important
for machine safety. Use only
high-pressure hoses, ttings
and couplings recommended
by the manufacturer.