To Next PageTo Next Page
Need help?Do you have a question about the Parkside PHET 15 A1 and is the answer not in the manual?
General| Magazine capacity | 100 nails |
|---|---|
| Cable length | 3 m |
| Voltage | 230 V |
| Nail Length | 15-32 mm |
| Nail Diameter | 1.2 mm |
Defines the private use of the staple gun for specific materials and conditions.
Lists the key components and functionalities of the electric nailer/stapler.
Details the items included with the electric nailer/stapler upon purchase.
Provides specifications like model, voltage, power, dimensions, and noise levels.
Presents measured noise and vibration values, with a warning to wear hearing protection.
Guidelines for maintaining a safe and well-lit work environment to prevent accidents.
Precautions related to power source, cords, and avoiding electrical hazards.
Advice on staying alert, using PPE, and preventing unintentional starts during operation.
Best practices for operating, maintaining, and storing the power tool safely.
Recommendations for ensuring the power tool's safety through qualified servicing.
Specific safety rules for operating the tacker, including handling fasteners and tool placement.
Additional safety measures such as wearing eye protection and securing workpieces firmly.
Emphasizes using only compatible accessories and attachments for safe and proper operation.
Step-by-step guide for preparing the electric nailer/stapler for its initial use.
Instructions on how to correctly load staples or nails into the device's magazine.
Instructions for switching on and using the electric nailer/stapler for its intended purpose.
Guidance on identifying and resolving common problems encountered during operation.
Procedures for keeping the device clean and in good working order to ensure longevity.
Details the warranty period, coverage, and claim procedures for the appliance.
Instructions on how to properly dispose of the product and its packaging environmentally.
Official declaration of the product's compliance with relevant EU directives and standards.
