Why won't my Parkside PHSA 20-Li A1 Trimmer start?
- VVickie HernandezJul 28, 2025
If your Parkside trimmer won't start, it might be due to a discharged battery. Try recharging it, keeping in mind the instructions for the rechargeable battery and charger. Another reason could be that the battery isn't properly inserted, so ensure it is correctly placed, again referring to the battery and charger instructions. Also, check that the safety switch is properly pressed, referring to the "Operation" section for guidance. If none of these work, the on/off switch might be defective, requiring repair at a service center.