To Next PageTo Next PageWhat to do if Parkside Power Tool motor is running but the tool doesn't move?
If the motor of your Parkside Power Tool is running but the tool isn't moving, the appliance attachment or tool may not be correctly mounted. Ensure that you fit the appliance attachment or tool correctly.
How to fix a Parkside PKGA 20-Li C2 that works with interruptions?
If your Parkside Power Tool works with interruptions, this may be caused by an internal lose contact, requiring repair by a service center.
How to fix a Parkside PKGA 20-Li C2 that doesn't start?
If your Parkside Power Tool doesn't start, it could be due to a discharged rechargeable battery. Try charging the rechargeable battery. Alternatively, the rechargeable battery might not be inserted correctly; ensure it is properly inserted. In some cases, the on/off switch may be broken, requiring repair by a service center.
What to do if my Parkside Power Tool works with interruptions?
If your Parkside Power Tool works with interruptions, it may be due to an internal loose contact, which requires repair by a service center. It can also happen because of a broken on/off switch.
Why is my Parkside Power Tool not starting?
Your Parkside Power Tool might not be starting due to several reasons: the rechargeable battery may be discharged (in this case, charge the rechargeable battery, observing the separate operating instructions for the rechargeable battery and charger); the rechargeable battery may not be inserted (in this case, insert the rechargeable battery, observing the separate operating instructions for the rechargeable battery and charger); or the on/off switch may be broken (in this case, it has to be repaired by a Service Centre).
Why isn't my Parkside PKGA 20-Li C2 moving even though the motor is running?
If the motor of your Parkside Power Tool is running but the tool isn't moving, the appliance attachment or tool might not be correctly mounted. Ensure that you fit the appliance attachment or tool correctly.
General| Brand | Parkside |
|---|---|
| Model | PKGA 20-Li C2 |
| Category | Power Tool |
| Language | English |
Device is for tightening/releasing screws and drilling; not for commercial use.
Details specifications like voltage, speed, weight, and sound/vibration levels for different attachments.
Guidelines for maintaining a safe working environment, avoiding hazards.
Precautions related to electrical hazards, grounding, and cord usage.
Advice on staying alert, using PPE, and preventing unintentional starts.
Instructions on proper tool usage, maintenance, and storage.
Safety guidelines for charging and using batteries, including disposal.
Specific safety warnings for the combination tool, including hidden wiring and securing workpieces.
Safety guidelines specific to the sawing function, including blade handling and kickback.
Safety advice for sanding and scraping operations, including dust and moisture hazards.
Precautions for using long drill bits, focusing on speed and pressure.
How to use the sabre saw attachment, including speed control and cutting technique.
