Parkside PMFW 310 F4 User Manual

MULTI-PURPOSE TOOL / MULTIFUNKTIONSWERK-
ZEUG / OUTIL MULTIFONCTION PMFW 310 F4
OUTIL MULTIFONCTION
Traduction des instructions d’origine
MULTIFUNKTIONSWERKZEUG
Originalbetriebsanleitung
MULTI-PURPOSE TOOL
Translation of the original instructions
MULTIFUNKČNÍ NÁŘADÍ
Překlad originálního provozního návodu
MULTIFUNCTIONEEL GEREEDSCHAP
Vertaling van de originele gebruiksaanwijzing
MULTIFUNKČNÉ NÁRADIE
Preklad originálneho návodu na obsluhu
NARZĘDZIE WIELOFUNKCYJNE
Tłumaczenie oryginalnej instrukcji obsługi
HERRAMIENTA MULTI FUNCIONAL
Traducción del manual de instrucciones original
MULTIVÆRKTØJ
Oversættelse af den originale driftsvejledning
ELETTROUTENSILE MULTIUSO
Traduzione delle istruzioni d’uso originali
MULTIFUNKCIÓS SZERSZÁM
Az originál használati utasítás fordítása
MULTIFUNKCIJSKO ORODJE
Prevod originalnega navodila za uporabo
МУЛТИФУНКЦИОНАЛЕН
ИНСТРУМЕНТ
Превод на оригиналното ръководство за експлоатация
UNEALTĂ MULTIFUNCŢIONALĂ
Traducerea instrucţiunilor de utilizare original
ΠΟΛΥΕΡΓΑΛΕΙΟ
Μετάφραση των αυθεντικών οδηγιών λειτουργίας
VIŠENAMJENSKI ALAT
Prijevod originalnih uputa za uporabu
IAN 499895_2204

Parkside PMFW 310 F4 Specifications

General

Power	310 W
Voltage	230 V
Oscillation angle	3.2°
Protection class	II
Cable length	2 m
Collet size	6 mm

Summary

General Power Tool Safety

Work Area and Electrical Safety

Guidelines for safe environment, electrical connections, and cord handling.

Personal Safety

Advice on staying alert, using PPE, and preventing unintentional starting.

Safe Tool Operation and Care

Power Tool Use and Handling

Instructions for proper operation, avoiding overreaching, and dressing appropriately.

Tool Maintenance and Storage

Specific Safety Instructions

Grinder Safety and Dust Hazards

Safety for grinders, material dust hazards, and required protective gear.

Health Risks and Electromagnetic Fields

Warnings on lung/hearing damage, vibration effects, and medical implant interference.

Working Procedures and Assembly

Operating Principle and Procedures

Accessory Selection and Application

Saw Blades and Sanding Plate Guide

Tool Fitting and Operation

Changing Tools and Fitting Sheets

Instructions for changing accessories, fitting sanding sheets, and safety during these tasks.

Basic Operation

Speed Control and Maintenance

Adjusting Oscillation Speed

Cleaning and Ventilation

Warranty and Support