GB / CY
|
5
WARNING!
► Depending on the manner in which the power tool is
being used, and in particular the kind of workpiece
being worked, the vibration and noise emission values
can deviate from the values given in these instructions
during actual use of the power tool.
► Try to keep the vibration load as low as possible.
Measures to reduce the vibration load are, e.g. wearing
gloves and limiting the working time. Wherein all states
of operation must be included (e.g. times when the
power tool is switched o and times where the power
tool is switched on but running without load).
General power tool safety
warnings
WARNING!
► Read all safety warnings, instructions, illustrations
and specications provided with this power tool.
Failure to follow all instructions listed below may
result in electric shock, re and/or serious injury.
Save all warnings and instructions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
1. Work area safety
a) Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
IB_450084_PMSA4A1_LB7.indb 5IB_450084_PMSA4A1_LB7.indb 5 31.05.2024 11:08:1431.05.2024 11:08:14
To Next Page
