16
GB
Trouble Shooting
Problem Possible Cause Fault Fixing
Equipment does not start
Battery is empty or not
inserted
Check charge level,have re-
pairs carried out by a qualifi ed
electrician, if necessary
Defective start lever (
16)
or release button (
15)
Repair by customer services
Worn carbon brushes
Defective motor
Grass too long
Set a greater cut heigh. Lift the
front wheels slightly by press-
ing down on the handle bar.
Motor stops
Blockage by foreign object Remove the foreign object
Result unsatisfactory or
motor labours
Cut height too low Set a higher cut height
Blade (
18) blunt
Have the blade sharpened or
replace it
Blade area blocked Clean the equipment
Blade (
18) assembled
incorrectly
Install the blade correctly
Blade fails to turn
Blade blocked by grass Remove the grass
Blade screw (
19) loose
Tighten the blade screw
Strange noises, rattling
or vibrations
Blade screw (
19) loose
Tighten the blade screw
Blade (
18) damaged
Replace the blade
To Next Page
Loading...
Need help?
General
