To Next PageTo Next PageWhat to do if saw blade quickly becomes blunt on Parkside Power Tool?
If the saw blade on your Parkside Power Tool becomes blunt quickly: * Ensure that the saw blade is suitable for the material you are processing. * Reduce the amount of pressure you are applying. * Lower the sawing speed.
Why is my Parkside PSSPA 20-Li B2 sawing poorly?
If your Parkside Power Tool exhibits poor sawing performance, consider the following: * Ensure the saw blade is appropriate for the material you are cutting. * Replace the saw blade if it is dull. * Adjust the sawing speed to the correct setting. * If the battery is low, charge it, referring to the separate instructions for the battery and charger.
Why won't my Parkside Power Tool start?
If your Parkside Power Tool won't start, check these potential causes: * Make sure the battery is properly inserted. If it isn't, insert the battery. * If the battery is discharged, recharge it, following the separate instructions for the battery and charger. * If the On/Off switch is defective, send it to the Service Centre for repair. * If the motor is defective - no solution provided.
What to do if my Parkside Power Tool has intermittent operation?
If your Parkside Power Tool is operating intermittently, the issue might be: * Internal loose contact, in this case send it to the Service Centre for repair. * A defective On/Off switch - no solution provided.
General| Battery Voltage | 20 V |
|---|---|
| No-load Speed | 0 - 2800 rpm |
| Battery Type | Lithium-Ion |
| Max Torque | 180 Nm |
| Torque | 180 Nm |
| Chuck Size | 1/4 inch |
Guides on correct usage and intended applications of the cordless jigsaw.
Essential safety guidelines for operation, including warnings and precautions.
Steps for setting up the tool and detailed instructions on how to use it.
Details specific parts like protective cover, blades, and guides with order numbers.
Addresses issues with power or battery not starting the appliance.
Solutions for inconsistent or irregular device performance.
Tips for improving cutting quality and speed.
Details warranty period, what is covered, and proof of purchase requirements.
Specifies conditions under which the guarantee is valid or invalid.
Instructions for making a guarantee claim efficiently.
Contact details for service centers in Great Britain and Ireland.
Details on chargeable repairs and product importer information.
Confirms product conformity with EU directives and applied standards in German.
Confirms product conformity with EU guidelines and standards in English.
Confirms product conformity with EU directives in French.
Confirms product conformity with EU directives in Dutch.
Confirms product conformity with EU directives in Polish.
Confirms product conformity with EU directives in Czech.
Confirms product conformity with EU directives in Slovak.
Confirms product conformity with EU directives in Danish.
Confirms product conformity with EU directives in Spanish.
Visual breakdown of the device with numbered parts for identification.
