10
Hairdryer care
Always unplug the appliance before cleaning it.
The filter and HFS device are essential for safe and proper operation of the appliance. Make
sure you clean them both on a weekly basis. Failure to do so may cause the hairdryer to
overheat, which may result in malfunctions and alter the heat temperature with consequent
hair damage.
During operation, the filter cap with its metal filter and the HFS device must be properly
mounted on the hairdryer at all times to prevent mulfunctioning and preserve the appliance.
1.
Rotate the filter cap and remove the
metal filter.
4.
Make sure to align the two reference
marks on the metal filter and the filter cap.
2. Rinse the filter under hot water and
remove any residual hair, hair spray and
dust with a small brush. In case of stubborn
impurities, use a degreaser. Dry the filter.
3.
Pull the HFS device out from its central
housing and remove captured hair.
5. Reinsert the HFS device in its housing and replace the filter cap with the bayonet-fitting metal
filter.
CLEANING THE FILTER:
©PARLUX SPA - ORIGINAL INSTRUCTIONS - PROFESSIONAL USE
To Next Page
Loading...
