19English
audio device must support the
Bluetooth
A2DP
profile (Advanced Audio Distribution Profile).
If you are using a
Bluetooth
audio player for the
first time, you have to pair both devices.
If both devices are already paired:
1.
Tap Music > Bluetooth Audio.
2.
Start playing a song on your audio player.
Screen commands
While playing a music track or the radio:
tap the screen to pause / resume playback
or mute the radio ;
slide your finger upwards to increase the
volume ;
slide your finger downwards to decrease
the volume.
While playing a music track (except audio
players connected using a jack / jack cable):
slide your finger to the right to skip to the
next track ;
slide your finger to the left to get back to
the previous track.
Note : If you are using the Parrot ASTEROID
Smart with an audio player connected via
Bluetooth, these commands are only available if
your audio player supports the AVRCP profile
(Audio/Video Remote Control Profile).
Internet
Warning: Internet connection via a 3G key
requires a subscription offer with a telephone
operator. Using this service can result in
significant roaming charges. Check the
conditions of your subscription and
consumption tracking with your operator.
Parrot disclaims any liability for associated
costs.
Connection w ith a 3G/4G key
Note : Refer to the compatibility section of our
website to see the list of 3G / 4G keys that are
compatible with the Parrot ASTEROID Smart.
1.
Connect a 3G key to the Parrot ASTEROID
Smart with a USB cable.
> A pop-up will appear.
Note : To ensure optimum reception quality, do
not connect your 3G/4G key to the back of the
Parrot ASTEROID Smart: use a USB cable to
install the accessory on the dashboard (or any
other unobstructed area).
2.
Enter your PIN code using the knob, then
select ENTER. Check the Memorise PIN
code option if you would like your PIN
code to be stored each time you turn on
To Next Page
Loading...
Need help?
General
